Size Guide

More Info
THE ULTIMATE UPGRADE IN HEARING PROTECTION
EarPeace custom fit delivers the best possible hearing protection experience because they fit your ears perfectly. With cutting edge acoustic filters and advanced ventilated design, these custom ear plugs create the clearest and sharpest natural sound experience available. Uniquely handcrafted, you get optimal isolation and fit, allowing you to wear them comfortably for hours at a time. Made for the most discerning audiophiles, Custom Fit EarPeace is as good as hearing protection gets.
SOUND
Designed for musicians and vocal performers, the redesigned acoustic filters give the flattest, most accurate response across the sound spectrum board. Keeping all frequencies in check relative to one another means you get to hear the music just as it should sound, but quieter with no loss of high or low frequencies. Not only does it provide a balanced reproduction but, its vented design reduces occlusion (how sound travels inside the body) giving your voice a more natural sound.
COMFORT
EarPeace custom fit is the most comfortable ear plug because it’s an exact replica of the inside of your ear. Our certified technicians take an impression of your ear or your audiologist does. Made from soft, medical-grade silicone – they will last for years. You’ll forget you are wearing them.
STYLE
Hearing protection is a must-have accessory for your entertainment experience. Do it right. EarPeace custom fits flush inside your ear – nothing sticks out of your ear. They are completely discreet in clear or can make a big splash in sparkle. Make it your own. Custom hearing protection says you are serious about your sense of hearing and your sound experience. Carry the best - EarPeace custom fit.
Description
Nothing compares to something built specifically for you.
Description
Nothing compares to something built specifically for you.
More Info
THE ULTIMATE UPGRADE IN HEARING PROTECTION
EarPeace custom fit delivers the best possible hearing protection experience because they fit your ears perfectly. With cutting edge acoustic filters and advanced ventilated design, these custom ear plugs create the clearest and sharpest natural sound experience available. Uniquely handcrafted, you get optimal isolation and fit, allowing you to wear them comfortably for hours at a time. Made for the most discerning audiophiles, Custom Fit EarPeace is as good as hearing protection gets.
SOUND
Designed for musicians and vocal performers, the redesigned acoustic filters give the flattest, most accurate response across the sound spectrum board. Keeping all frequencies in check relative to one another means you get to hear the music just as it should sound, but quieter with no loss of high or low frequencies. Not only does it provide a balanced reproduction but, its vented design reduces occlusion (how sound travels inside the body) giving your voice a more natural sound.
COMFORT
EarPeace custom fit is the most comfortable ear plug because it’s an exact replica of the inside of your ear. Our certified technicians take an impression of your ear or your audiologist does. Made from soft, medical-grade silicone – they will last for years. You’ll forget you are wearing them.
STYLE
Hearing protection is a must-have accessory for your entertainment experience. Do it right. EarPeace custom fits flush inside your ear – nothing sticks out of your ear. They are completely discreet in clear or can make a big splash in sparkle. Make it your own. Custom hearing protection says you are serious about your sense of hearing and your sound experience. Carry the best - EarPeace custom fit.
Levels of Protection
PRO-10
The PRO-10 is our lightest filter, giving softer attenuation for delicate and detailed acoustic performances. Great for acoustic musicians, smaller ensembles, and anyone exposed to moderate sound levels. The PRO-10 will protect your hearing in noise levels of up to 90dB.
PRO-17
The PRO-17 is the most natural-sounding acoustic filter in the world. Designed specifically for musicians and vocal performers, the PRO-17 offers the flattest and most accurate frequency response of any hearing protector. This means that you hear as close to reference sound as possible – but 17dB quieter with nominal frequency distortion. The PRO-17 is the perfect choice for anyone who needs to hear clearly in noise levels of up to 100dB.
PRO-20
Designed to soften harsh high frequency sounds, the PRO-20 is ideal for drummers. The PRO-20 provides protection in ambient sound levels of up to 105dB.
PRO-26
The PRO-26 is one of the strongest, level-attenuating earplugs available, offering protection for the loudest and most challenging sound environments. Whether you are dancing all day in front of the stacks, working behind the bar or running front of house sound, the PRO-26 will keep your hearing safe. The PRO-26 will provide protection in sound levels of up to 110dB.
PRO-IMPULSE
Our PRO-Impulse filter is designed to provide optimum protection from high levels of impulse sound. Developed for military use, these filters protect hearing from gunfire, artillery noise and impulse sounds from loud machines like nail guns, drop hammers and riveters. Designed to allow air to enter the ear, this unique filter technology retains spatiality and sound directionality as required in hunting and combat situations. Our Impulse filters have undergone full environmental testing for humidity, sand storms, hot and cold temperatures and 12+ hour comfort. PRO-Impulse is suitable for indoor and outdoor situations where protection from loud impulse noise is required.
UNEQUALED PERFORMANCE
The EarPeace custom fit acoustic filters provide the flattest response of any hearing protection. These ear plugs deliver an accurate representation for anyone that requires complete fidelity from their ear plugs. Originally designed and perfected for musicians and vocalists, EarPeace custom fit is now retooled with the wearer in mind. For starters, it’s smaller than many competing filters which means it can fit into smaller ears without any protrusion which is great for both comfort and style. The filters can also be swapped to any other level as your environment demands, giving you complete control over your protection with just a single set of custom molds. In addition, EarPeace custom fit are water resistant so they can be used outside or in high moisture environments and can withstand perspiration without it damaging the filter membrane.
WE SOLVED THE “OCCLUSION EFFECT”
Trying to create a natural sounding earplug is hard. Sounds that you create are carried to your ear canal through bone-conducted vibrations along the side of the head. These vibrations normally escape through the open ear canal so they not “heard”. When you block off your ear canal, the sound of your own voice / what you ‘hear’ is amplified inside your head because the vibrations don’t escape. Audiologists call this the ‘the occlusion effect’. A large amount of occlusion can be eliminated by ensuring that the ear plug sits deep enough in the ear canal so the vibrations hit the plug rather than entering the canal at all. EarPeace custom fit goes a step further and are vented to allow sound to pass both ways, delivering a natural sound experience.
Performance
Custom Fit acoustic filters provide the flattest response of any hearing protection.
Performance
Custom Fit acoustic filters provide the flattest response of any hearing protection.
Levels of Protection
PRO-10
The PRO-10 is our lightest filter, giving softer attenuation for delicate and detailed acoustic performances. Great for acoustic musicians, smaller ensembles, and anyone exposed to moderate sound levels. The PRO-10 will protect your hearing in noise levels of up to 90dB.
PRO-17
The PRO-17 is the most natural-sounding acoustic filter in the world. Designed specifically for musicians and vocal performers, the PRO-17 offers the flattest and most accurate frequency response of any hearing protector. This means that you hear as close to reference sound as possible – but 17dB quieter with nominal frequency distortion. The PRO-17 is the perfect choice for anyone who needs to hear clearly in noise levels of up to 100dB.
PRO-20
Designed to soften harsh high frequency sounds, the PRO-20 is ideal for drummers. The PRO-20 provides protection in ambient sound levels of up to 105dB.
PRO-26
The PRO-26 is one of the strongest, level-attenuating earplugs available, offering protection for the loudest and most challenging sound environments. Whether you are dancing all day in front of the stacks, working behind the bar or running front of house sound, the PRO-26 will keep your hearing safe. The PRO-26 will provide protection in sound levels of up to 110dB.
PRO-IMPULSE
Our PRO-Impulse filter is designed to provide optimum protection from high levels of impulse sound. Developed for military use, these filters protect hearing from gunfire, artillery noise and impulse sounds from loud machines like nail guns, drop hammers and riveters. Designed to allow air to enter the ear, this unique filter technology retains spatiality and sound directionality as required in hunting and combat situations. Our Impulse filters have undergone full environmental testing for humidity, sand storms, hot and cold temperatures and 12+ hour comfort. PRO-Impulse is suitable for indoor and outdoor situations where protection from loud impulse noise is required.
UNEQUALED PERFORMANCE
The EarPeace custom fit acoustic filters provide the flattest response of any hearing protection. These ear plugs deliver an accurate representation for anyone that requires complete fidelity from their ear plugs. Originally designed and perfected for musicians and vocalists, EarPeace custom fit is now retooled with the wearer in mind. For starters, it’s smaller than many competing filters which means it can fit into smaller ears without any protrusion which is great for both comfort and style. The filters can also be swapped to any other level as your environment demands, giving you complete control over your protection with just a single set of custom molds. In addition, EarPeace custom fit are water resistant so they can be used outside or in high moisture environments and can withstand perspiration without it damaging the filter membrane.
WE SOLVED THE “OCCLUSION EFFECT”
Trying to create a natural sounding earplug is hard. Sounds that you create are carried to your ear canal through bone-conducted vibrations along the side of the head. These vibrations normally escape through the open ear canal so they not “heard”. When you block off your ear canal, the sound of your own voice / what you ‘hear’ is amplified inside your head because the vibrations don’t escape. Audiologists call this the ‘the occlusion effect’. A large amount of occlusion can be eliminated by ensuring that the ear plug sits deep enough in the ear canal so the vibrations hit the plug rather than entering the canal at all. EarPeace custom fit goes a step further and are vented to allow sound to pass both ways, delivering a natural sound experience.
Fitting Guide
Each of your hearing protectors is marked with red or blue detail. The EarPeace with red detail fits the right ear and the one with blue detail fits the left ear. Hold the hearing protector as in Figure 1 and insert into the ear canal twisting it backwards while applying slight pressure as in Figures 2 & 3. Press the protector until it fits comfortably in your ear as in Figure 4.
Where your hearing protectors have a grip, hold the grip when inserting the earpieces.
To remove, grip the hearing protectors and twist in a forward motion while pulling gently from the ear. NEVER remove by pulling on the (optional) connection cord or the cable (Communicator variant only).
A tube of comfort cream is provided which can help with insertion, by spreading a small amount on the tip of the earpiece that fits into the ear canal. Pay attention not to get cream into the sound duct.
CARE AND MAINTENANCE OF YOUR HEARING PROTECTORS
It is important that you read these notes to ensure longevity of your custom hearing protectors. Failure to care for your hearing protectors in accordance with the instructions could severely affect their performance.
Use a moist cloth or sterile wipe to clean the silicone moulds. Visually inspect the sound ducts on each earpiece to check that no wax, skin debris or dirt has penetrated. Use the wire loop pick provided to carefully remove any matter. Always return to the carry pouch when not in use. Keep away from moisture and heat or direct sunlight. DO NOT immerse the filters in any liquid. The filters can be removed by gently squeezing the mould around the filter until it ‘pops’ out allowing the moulds to be thoroughly cleaned. After cleaning, ensure that the filter socket is completely dry before replacing the filter.
If your hearing protectors incorporate wired components do not immerse your earpieces in any liquid.
This product may be adversely affected by certain chemical substances. Further information should be sought from the manufacturer.
Instructions
Instructions
Fitting Guide
Each of your hearing protectors is marked with red or blue detail. The EarPeace with red detail fits the right ear and the one with blue detail fits the left ear. Hold the hearing protector as in Figure 1 and insert into the ear canal twisting it backwards while applying slight pressure as in Figures 2 & 3. Press the protector until it fits comfortably in your ear as in Figure 4.
Where your hearing protectors have a grip, hold the grip when inserting the earpieces.
To remove, grip the hearing protectors and twist in a forward motion while pulling gently from the ear. NEVER remove by pulling on the (optional) connection cord or the cable (Communicator variant only).
A tube of comfort cream is provided which can help with insertion, by spreading a small amount on the tip of the earpiece that fits into the ear canal. Pay attention not to get cream into the sound duct.
CARE AND MAINTENANCE OF YOUR HEARING PROTECTORS
It is important that you read these notes to ensure longevity of your custom hearing protectors. Failure to care for your hearing protectors in accordance with the instructions could severely affect their performance.
Use a moist cloth or sterile wipe to clean the silicone moulds. Visually inspect the sound ducts on each earpiece to check that no wax, skin debris or dirt has penetrated. Use the wire loop pick provided to carefully remove any matter. Always return to the carry pouch when not in use. Keep away from moisture and heat or direct sunlight. DO NOT immerse the filters in any liquid. The filters can be removed by gently squeezing the mould around the filter until it ‘pops’ out allowing the moulds to be thoroughly cleaned. After cleaning, ensure that the filter socket is completely dry before replacing the filter.
If your hearing protectors incorporate wired components do not immerse your earpieces in any liquid.
This product may be adversely affected by certain chemical substances. Further information should be sought from the manufacturer.
FAQ Frequently asked questions
What is the difference between EarPeace and Foam Ear Plugs?
We develop “high fidelity” hearing protection. Each of our products include precision engineered acoustic filters that allow in a precise amount of unobstructed sound. You get all frequencies, just at a lower volume. EarPeace is great for any loud environment where you need to lower the decibel level and still hear clearly, enjoying live music or riding your motorcycle. Foam ear plugs, on the other hand, are not high fidelity. They do not have an acoustic filter in them. This means that they block the maximum amount of sound, but the compromise is that you lose most of the high frequencies. Foam ear plugs are great for industrial applications, shooting, working on the tarmac at an airport, etc. - all things that require the highest amount of protection possible because they are the loudest environments. But they are not particularly good for music or other activities where the dB level is lower and where you want to be able to hear in “high fidelity.” The other aspects that differentiate EarPeace from foam are noted on our site - they are much more comfortable, more discreet, and they come in a great carrying case. These are all major reasons why people in general won’t wear hearing protection, so we solved these issues when developing EarPeace.
What is the difference between Music, Moto & Safety?
All models have the same great filter set so you get the best audio quality out there. Each model includes 3 sets of filters (11, 14 & 19 db reduction) with distinct color plugs for different communities.
What are the various filters used for?
EarPeace Music, Moto & Safety original include 3 sets of filters. The medium and high filters are high fidelity, evenly lowering the sound pressure across frequencies. The max filter is a total block filter for when you need to really turn down the volume. Each filter set performs differently to fit your specific needs. Medium Protection (CLEAR) = SNR 17 / NRR 11. These filters are suitable for most loud events. Rehearsals, dance events, movies are all examples. High Protection (RED) = SNR 20 / NRR 14. These filters are perfect for your live concerts, festivals, decrease wind noise & engine noise when on your motorcycle OR DIY projects around the house. Max Protection (BLACK) = SNR 26 / NRR 19. These filters are a total block for when you really need to turn down the noise. Perfect for working the stage or sleeping.
How do I know which size to order- Standard or Petite?
Ear canal sizes vary widely but our universal fit Standard size ear plugs fit ~80% of users. If you have comfortably used earplugs before or your music ear buds fit easily we recommend ordering our Standard size. Our Petite size ear plugs are 20% smaller and may fit you best if you have had experiences where ear plugs won’t stay in your ear, or, your music ear buds become uncomfortable over time. You may have also been told by an audiologist that you have smaller ear canals.
How do I clean my EarPeace?
EarPeace is easy to clean and maintain. Wipe the ear plugs off with a damp cloth (e.g. wash cloth) each time you wear them. Keep them stored in the aluminum case. If they become particularly dirty you can wash them in warm soapy water - however - remove the plastic attenuation filter before submerging the plug in water. Reinsert the filter only after the plug has dried thoroughly. The ear plugs should be replaced at any sign of wear and tear.
Can EarPeace be used for shooting?
EarPeace was designed for optimum performance in loud environments where you need passive protection - music events, motorsports, DIY projects, and even the movies. We include a MAX protection filter that is a solid block but EarPeace is not originally designed for impulse noise like shooting. Shooting requires fully blocking the ear canal and the best solution for that is over the ear muffs or if budget allows our Custom FIT EarPeace with Impulse Filters. The impulse filters available in our custom fits are the highest tech solution available for shooting enthusiasts. The filters contain an acoustic membrane that is engineered to snap stiff when exposed to impulse noise - like a gunshot. The membrane immediately relaxes and you are able to hear clearly again. You'll be able to communicate freely, be highly situationally aware and protected when you pull the trigger.
all
FAQs